Piranah FX

Discussion specifically about the Shark's bigger brother, the CNC Shark Pro

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
lesshuck
Posts: 2
Joined: Sun Dec 13, 2015 1:46 pm

Piranah FX

Post by lesshuck »

There is not defined user group for this so I am starting here as a new user.

I have a new FX and it makes a very high pitch squeal when control panes come to life - Is this normal?

User avatar
meb
Posts: 100
Joined: Fri Aug 06, 2010 6:49 pm
Location: Nevada, Texas

Re: Piranah FX

Post by meb »

They made another forum that some of the Piranha Fx uses are using here: http://www.nextwaveautomation.com/forum ... nc-piranha

When you turn on the Piranha the stepper motors engage the drive system and there is a hum that you can hear. This is normal and probably what you are talking about.

lesshuck
Posts: 2
Joined: Sun Dec 13, 2015 1:46 pm

Re: Piranah FX

Post by lesshuck »

Thnx for the info. I hear that sound too but this is a very high frequency that I cannot hear with my damaged hearing in the high ranges but my technical buddy who has a computer repair business hears it and says it gives him a headache and leaves the shop when I fire it up

Thnx for the ref to the Piranha forum, I will go there now

Post Reply