HDPE plate vs. aluminum

Discussion specifically about the Shark's bigger brother, the CNC Shark Pro

Moderators: sbk, al wolford

HDPE plate vs. aluminum

Postby Ron56 » Fri Oct 28, 2016 6:20 pm

Hi Folks

Newbie here.
I read a post somewhere on here about the Shark Black Diamonds back plate.
It is the HDPE plate that the Z axis rails attach to.
Rockler had a aluminum replacement but now I can’t find it here or on Rockler.
I think it’s 3/8” by 7” by 36”.
While I’m at it I may as well ask about a router clamp for the Shark.
Can anyone tell me which clamp will work with a PORTER-CABLE 892.
The HDPE plate on the machine is fine just that you have to be careful not to flex it.
I thank you in advance for any helpful reply. Ron:
If at first you don't succeed, rethink the situation.
Ron56
 
Posts: 4
Joined: Thu Oct 29, 2015 2:31 pm
Location: Foothills of North Carolina

Re: HDPE plate vs. aluminum

Postby tonydude » Sat Oct 29, 2016 12:36 pm

Ron,

Go to nextwaveautomation for the parts for your machine.They make the shark machines http://shop.nextwaveautomation.com/shop ... itemid=150

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.506, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1466
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY


Return to Shark Pro

Who is online

Users browsing this forum: No registered users and 4 guests

cron