Safe Z

Discussion specifically about the Shark's bigger brother, the CNC Shark Pro

Moderators: sbk, al wolford

Safe Z

Postby rtheademan » Thu Aug 30, 2018 4:24 pm

Does anyone know how to change the safe Z?
rtheademan
 
Posts: 6
Joined: Fri Apr 18, 2014 10:21 am

Re: Safe Z

Postby Kayvon » Thu Aug 30, 2018 4:51 pm

There's an option for safe Z on the right-hand panel of VCarve in the setup area.

Here's a description on how to use the settings:
http://support.vectric.com/aspire-quest ... -z1-and-z2
User avatar
Kayvon
 
Posts: 312
Joined: Tue Oct 21, 2014 11:46 pm

Re: Safe Z

Postby rtheademan » Thu Aug 30, 2018 4:59 pm

Yes, but it won't let me change it. It is greyed.
rtheademan
 
Posts: 6
Joined: Fri Apr 18, 2014 10:21 am

Re: Safe Z

Postby rtheademan » Thu Aug 30, 2018 5:25 pm

Thank you for your help, I will see if that gets it.
rtheademan
 
Posts: 6
Joined: Fri Apr 18, 2014 10:21 am

Re: Safe Z

Postby tonydude » Fri Aug 31, 2018 6:24 am

Look at this.

Tony
Attachments
safe.JPG
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.506, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1466
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Safe Z

Postby henry raymond » Fri Aug 31, 2018 10:21 pm

I’m new but what is the safe Z?
henry raymond
 
Posts: 2
Joined: Sun Jul 08, 2018 3:33 pm

Re: Safe Z

Postby sharkcutup » Sat Sep 01, 2018 8:56 am

henry,

This might help

https://docs.vectric.com/docs/V9.0/VCar ... Setup.html

Clearance (Z1)
This is the height above the job at which it is safe for the cutter to move at rapid or maximum feed rate. The software will raise the bottom of the cutter to this height when it traverses the material.


Sharkcutup
Shark HD3 Pro Plus Extended Bed with Spindle
Facebook: Hogan's CNC Crafts
sharkcutup
 
Posts: 300
Joined: Tue Mar 08, 2016 5:23 pm


Return to Shark Pro

Who is online

Users browsing this forum: No registered users and 1 guest