Part came loose, hit e-stop on pc screen no power now.

Discussion about the CNC Shark Pro Plus

Moderators: sbk, al wolford

Part came loose, hit e-stop on pc screen no power now.

Postby tucker » Thu Nov 30, 2017 3:18 pm

:cry: I was in the middle of a cut, when the part came loose during the cutout.
I clicked the e-stop button on the pc screen, and everything shut down as expected.
However, I can't get power to come back on at the control panel.
Any suggestions?
tucker
 
Posts: 5
Joined: Sat Dec 20, 2014 9:57 pm

Re: Part came loose, hit e-stop on pc screen no power now.

Postby tonydude » Thu Nov 30, 2017 8:07 pm

Turn the emergency stop button on the control box and it will pop back out. After you hit the stop on the control screen, hit to return home.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 8.511, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1418
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY


Return to Shark Pro Plus

Who is online

Users browsing this forum: No registered users and 3 guests

cron