Controler software upgrade

Discussion about the CNC Shark Pro Plus

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
tonybell9699
Posts: 48
Joined: Sun Oct 12, 2014 9:04 pm

Controler software upgrade

Post by tonybell9699 »

Hello,

I just moved to FL, where the PC that had my controler software had to be reinstalled. I have shark controler software 1.6, I thought i had 2.0 installed before, but can not find the upgrade. Is there a link?

thanks

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: Controler software upgrade

Post by Rando »

tonybell9699 wrote:Hello,

I just moved to FL, where the PC that had my controler software had to be reinstalled. I have shark controler software 1.6, I thought i had 2.0 installed before, but can not find the upgrade. Is there a link?

thanks
The Registration instructions page (http://register.nextwaveautomation.com/) says to use the v3.0 control panel, which can be downloaded from:

http://nextwaveautomation.com/Downloads ... P_v3.0.exe

Until Monday morning (I'll take it down, since I don't really have the right to post it), you can get a copy of the v2.1 Build 16 I have in archive, at:

http://www.thomr.com/DropZone/installCN ... uild16.exe

Thom
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

tonybell9699
Posts: 48
Joined: Sun Oct 12, 2014 9:04 pm

Re: Controler software upgrade

Post by tonybell9699 »

Thanks!!

Post Reply