Page 1 of 1

Part came loose, hit e-stop on pc screen no power now.

Posted: Thu Nov 30, 2017 3:18 pm
by tucker
:cry: I was in the middle of a cut, when the part came loose during the cutout.
I clicked the e-stop button on the pc screen, and everything shut down as expected.
However, I can't get power to come back on at the control panel.
Any suggestions?

Re: Part came loose, hit e-stop on pc screen no power now.

Posted: Thu Nov 30, 2017 8:07 pm
by tonydude
Turn the emergency stop button on the control box and it will pop back out. After you hit the stop on the control screen, hit to return home.

Tony