another clock
Moderators: al wolford, sbk, Bob, Kayvon
Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
another clock
Have a GREAT DAY everyone!!!
Be SAFE around those AWESOME machines!!!
Sharkcutup
Last edited by sharkcutup on Fri May 19, 2017 11:22 am, edited 1 time in total.
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: another clock
Sharkcutup,
Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there.
This is certainly an interesting pattern.
Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there.
This is certainly an interesting pattern.
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: another clock
Neither I live in the Southeast of the USA. I posted this thread from my cell phone, not exactly sure why the photo is upside down here. It is in the correct orientation on my cell.Sharkcutup,
Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there.
This is certainly an interesting pattern.
Yeah the pattern was drawn from what I had seen while I was out and about one day. Thought I'd give it a go and see how it would look --- turned out very nice so far. I plan on putting a thin slab
of red oak in between the two base slabs and putting a darker stain on the middle (clock) section with the rest I will probably just put a natural finish coat on them.
Have a GREAT DAY!!!
Be SAFE around those AWESOME machines!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: another clock
Join us in the wooden clock thread... you'll find some increased challenge.sharkcutup wrote:This just getting too dang easy! Design it, prepare it, carve it!!!
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: another clock
Challenge --- I Agree!!!Join us in the wooden clock thread... you'll find some increased challenge. Kayvon
But I am not so sure I want to play around with " Time "! Seems to me that " Time " has been moving along just fine without any of my help and/or interference!!!
Kayvon, Thank you for the suggestion though! I have been monitoring that particular Thread "CNC and Clock Building" from time to time. It is fascinating and AWE inspiring to see wood returned to life once again!
Good Luck with your Wood Clock Building!!!
Have a GREAT DAY!!!
Be SAFE around those AWESOME machines!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: another clock
Does the part with the clock in it just sit on the two vertical pieces?
Very neat design!
Very neat design!
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: another clock
Yes it does. This way you can take it down to change the battery whenever needed without requiring to have to move the whole thing.Does the part with the clock in it just sit on the two vertical pieces?
It is nearing completion so I will be posting a photo of the completed clock here soon!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554