Try a different usb cable. Also go back to a different version of the control panel. I have 2 old cnc sharks and have not upgraded the control panel at all. I'm using a laptop with xp windows on one and the other is a vista windows. People have had bad communication with windows 10. Control panel software V3.0 is for the pendant controlled machines including the Piranha and is what comes standard with these units. Here is updates from nextwave
http://shop.nextwaveautomation.com/shop ... x?recid=26 more info http://help.nextwaveautomation.com/
very interesting read http://www.cncsharktalk.com/viewtopic.p ... 003#p30003
Hope this helps you.
Tony
original Shark HD owner - control panel
Moderators: al wolford, sbk, Bob, Kayvon
Re: original Shark HD owner - control panel
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: original Shark HD owner - control panel
I was thinking of the cable as a possible problem.
I bought and installed a new USB cable with still no contact with the controller.
I bought and installed a new USB cable with still no contact with the controller.
Re: original Shark HD owner - control panel
And let that be a lesson to you all: there IS no "USB cable problem"minoxy wrote:I was thinking of the cable as a possible problem.
I bought and installed a new USB cable with still no contact with the controller.
I have never once come across a USB cable that was broken in such a way as to be intermittent.
And I've used hundreds of them since they first started coming out.
Sure it's "possible"...but how many people here have ever actually done this, and then used that same cable elsewhere with no problems? Right...nearly everyone. If you have a USB cable that worked yesterday, unless you actually did something egregious to that cable, there is essentially zero chance it has changed.
That so-called "fix" is nothing but a stall tactic used by people who don't know the real source of the problem. Or worse, it's their own systems design that causes the communications error, and it has nothing to do with the cable.
Yes, I'm sure someone (might even be sharkcutup...except he knows the truth too!) will stand and claim this and that, and how could I possibly be so dense...blah blah mofo blah. There's at least two other people on this forum who could even have ever read the USB specification, and I'm one of them. And I'm here to tell you USB don't work that way. If there is a communications problem, then it's a software issue. The probability that the issue has to do with a cable that worked fine yesterday (and works fine elsewhere today) is so vanishingly small that even if that WERE the problem, it's not the cable's fault!
Thom
Last edited by Rando on Sun May 21, 2017 9:57 am, edited 2 times in total.
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: original Shark HD owner - control panel
Not in this life Rando!Yes, I'm sure someone (likely sharkcutup) will stand tall and claim this and that, and how could I possibly be so dense...blah blah mofo blah. There's two people on this forum who could even have ever read the USB specification, and I'm one of them. And I'm here to tell you USB don't work that way. If there is a communications problem, then it's a software issue. The probability that the issue has to do with a cable that worked fine yesterday (and works fine elsewhere today) is so vanishingly small that even if that WERE the problem, it's not the cable's fault!
![Surprised :o](./images/smilies/icon_e_surprised.gif)
I am 100% with you on this one. I have used many USB cables (powered and un-powered) and have never had situations like i have been reading on this forum.
Oh and fyi I have read the USB specification and as you have said
I totally agree!it's not the cable's fault!
Have a Great DAY!!!
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Be SAFE around those AWESOME machines!!!
![Wink ;)](./images/smilies/icon_e_wink.gif)
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: original Shark HD owner - control panel
Duly noted, and aspersions corrected, thankssharkcutup wrote:
Not in this life Rando!![]()
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Re: original Shark HD owner - control panel
As I thought, the cable.
I took off the cable to my HP Printer and swapped it with the cable to the shark HD.
The Shark works!
and
The printer works.
Strange.
I took off the cable to my HP Printer and swapped it with the cable to the shark HD.
The Shark works!
and
The printer works.
Strange.
Re: original Shark HD owner - control panel
And if you swap them back, they likely both still work too...
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)