photovcarve pp for hd4

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

photovcarve pp for hd4

Postby Jacduck » Sun May 06, 2018 9:04 pm

I have tried the add the new HD4 pp to the old pp list in photovcarve and it doesn't show up on the list. Is there a way to get the new inch pp into photovcarve?
If my grandkids or great-grandkids were here I am sure it would be easy.

Thanks jacduck
John C up in MI aka jacduck before the internet
Jacduck
 
Posts: 13
Joined: Sun Nov 12, 2017 8:24 am

Re: photovcarve pp for hd4

Postby tonydude » Mon May 07, 2018 8:45 am

http://shop.nextwaveautomation.com/shop ... x?recid=26 Go down the page and download the post processor for photo v carve only. You can't use the new HD4 post processor. Also here is a pdf on how to install the post processor in photo v carve, just go down the page till u find it.

Tony
Attachments
CNC Shark Post Processors - 3 Jan 11.pdf
(1.05 MiB) Downloaded 30 times
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.014, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1454
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: photovcarve pp for hd4

Postby Jacduck » Fri May 11, 2018 1:06 pm

Thanks Tony but the way I read it there is not a way to use Photocarve on an HD4 since the old inch pp won't run the hd4. Am I correct?
John C up in MI aka jacduck before the internet
Jacduck
 
Posts: 13
Joined: Sun Nov 12, 2017 8:24 am

Re: photovcarve pp for hd4

Postby tonydude » Tue May 15, 2018 4:38 pm

Don't know. Try it and see.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.014, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1454
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: photovcarve pp for hd4

Postby Rando » Tue May 15, 2018 4:53 pm

Post processors are not very complicated. A simple difference between one that works and doesn't is often enough to tell where the problem is.
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Rando
 
Posts: 583
Joined: Tue Jan 06, 2015 3:24 pm
Location: Hoquiam, WA


Return to Software. Programming

Who is online

Users browsing this forum: No registered users and 2 guests