Safe Z
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 6
- Joined: Fri Apr 18, 2014 10:21 am
Safe Z
Does anyone know how to change the safe Z?
Re: Safe Z
There's an option for safe Z on the right-hand panel of VCarve in the setup area.
Here's a description on how to use the settings:
http://support.vectric.com/aspire-quest ... -z1-and-z2
Here's a description on how to use the settings:
http://support.vectric.com/aspire-quest ... -z1-and-z2
-
- Posts: 6
- Joined: Fri Apr 18, 2014 10:21 am
Re: Safe Z
Yes, but it won't let me change it. It is greyed.
-
- Posts: 6
- Joined: Fri Apr 18, 2014 10:21 am
Re: Safe Z
Thank you for your help, I will see if that gets it.
Re: Safe Z
Look at this.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 2
- Joined: Sun Jul 08, 2018 3:33 pm
Re: Safe Z
I’m new but what is the safe Z?
-
- Posts: 411
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Safe Z
henry,
This might help
https://docs.vectric.com/docs/V9.0/VCar ... Setup.html
This might help
https://docs.vectric.com/docs/V9.0/VCar ... Setup.html
SharkcutupClearance (Z1)
This is the height above the job at which it is safe for the cutter to move at rapid or maximum feed rate. The software will raise the bottom of the cutter to this height when it traverses the material.
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.009
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.009