Vintage Lead Screw Help

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
Ripper
Posts: 15
Joined: Fri Nov 18, 2016 5:15 pm

Vintage Lead Screw Help

Post by Ripper »

Hello all, I am looking for a y-axis lead screw for the original white 13 x 24 shark. I would be interested in purchasing this item as my old screw end has been damaged.
Thanks for your time,
John

Ripper
Posts: 15
Joined: Fri Nov 18, 2016 5:15 pm

Re: Vintage Lead Screw Help

Post by Ripper »

By the way, the specs are;

8 threads per inch
1/2” screw diameter
2 start
.250 lead

Thanks,
John

kevinp
Posts: 5
Joined: Tue May 26, 2015 3:21 pm

Re: Vintage Lead Screw Help

Post by kevinp »

John,

You can purchase the Hi-Lead (Acme 1/2 x .250 right Hand .25 lead) screw from Roton here:

https://www.roton.com/family/hi-lead-ri ... s-7060404/

Or, you can find it on Granger.com

I just purchased a couple from Roton as I'm upgrading my Shark Pro (all linear X and Y rails, and replacing the 3/8 X axis with the 1/2" screw) per this thread:

http://www.cncsharktalk.com/viewtopic.php?f=9&t=1342

Disadvantage is the lead screw does not come machined on the ends, so you'll have to purchase a different lead screw coupler to attach it to your motor, and make a bigger bearing hole for the Y to go into at the back of the base. I purchased my motor coupler (and a couple thread clamps) from http://www.dumpstercnc.com. Here is the link to their parts for the Acme 1/2-8 2 Start (4 turn per inch) lead screws

http://dumpstercnc.com/acme_12082.html

Hope that helps.

-Kevin-

Post Reply