What is making my Shark stop or pause during a carving? I have seen this several times and im not sure if its something im doing or if its something else. Every once in awhile i can hit the pause/play button and it will start up again.
Thanks!
Issue with stopping/pausing
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Re: Issue with stopping/pausing
Which controller are you using? Laptop/PC or pendant?
If it's a pendant with a touchscreen, it could be detecting false touches.
If it's a PC, it's possible someone is hitting the keyboard by accident when the pause button it highlighted. Pushing [ENTER] or [SPACEBAR] after starting will pause the controller because the controller automatically highlights the pause button after starting.
If it's a pendant with a touchscreen, it could be detecting false touches.
If it's a PC, it's possible someone is hitting the keyboard by accident when the pause button it highlighted. Pushing [ENTER] or [SPACEBAR] after starting will pause the controller because the controller automatically highlights the pause button after starting.
-
- Posts: 5
- Joined: Mon Jul 27, 2020 8:21 pm
Re: Issue with stopping/pausing
Im using a laptop. No one is around the laptop except me..lol. So i know the buttons are not getting hit. Sometimes i can get it to start back up, but most times i cant.
Re: Issue with stopping/pausing
Have you tried replacing the USB cable between the PC and the controller box? Many users have reported problems with the default cable or cheap replacements.
-
- Posts: 5
- Joined: Mon Jul 27, 2020 8:21 pm
Re: Issue with stopping/pausing
Ill try that next.