Project File Sharing

Share your Shark projects with other forum members!

Moderators: sbk, al wolford

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.

Re: Project File Sharing

Postby sharkcutup » Mon Nov 14, 2016 8:33 am

Here is another thought as to why individuals may not share their files with others here on the forum.

A possible LAWSUIT --- admit it the times today with lawsuit happy lawyers and individuals out there!

An individual say downloads a file from this forum and does not take the time to go over the file to make changes that suits his/her machine and setup. Runs a project thereby either doing damages to their machine or even worse bodily harm.

This of course is my own opinion and observation.

Have a GREAT DAY!!! :D

Be SAFE around those AWESOME machines!!! ;)
Shark HD3 Pro Plus Extended Bed with Spindle
Facebook: Hogan's CNC Crafts
sharkcutup
 
Posts: 289
Joined: Tue Mar 08, 2016 5:23 pm

Re: Project File Sharing

Postby bill z » Tue Nov 15, 2016 4:15 pm

I like this idea when sharing is allowed. I would live to give anyone interested some of my creations. I say creations but I get most all of my ideas from the Internet.

Not everyone uses the Vectric Software products.

Plus, some are using an older version that will not load files made from a newer version. Concession should be made.

DXF files with finished pictures helps. Still work to be done to get in a tap format.

Just my observations and suggestions about sharing files.
User avatar
bill z
 
Posts: 262
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Project File Sharing spoon

Postby pwsmas » Thu Apr 26, 2018 11:09 am

Does anyone have a .crv spoon file they are willing to share? Thanks.
pwsmas
 
Posts: 2
Joined: Wed Jan 10, 2018 3:08 pm

Re: Project File Sharing spoon

Postby Bob » Thu Apr 26, 2018 11:30 am

pwsmas wrote:Does anyone have a .crv spoon file they are willing to share? Thanks.

I posted files here: http://forum.vectric.com/viewtopic.php? ... on#p209290
You'll need to scroll down to the ones I posted.
As with all shared files, make sure you understand what you are doing before you try this. Do test cuts first. Read the directions. But, most importantly, don't blame me if something doesn't go as you planned.
Bob
User avatar
Bob
 
Posts: 1079
Joined: Sun Aug 08, 2010 3:35 pm

Previous

Return to Shark Project File Sharing.

Who is online

Users browsing this forum: No registered users and 0 guests

cron