Pendant Menu

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Pendant Menu

Postby JMOlshefski » Sat Mar 16, 2019 9:03 pm

Couple of questions, are there any manuals that cover all the menu choices on the pendant (like boundries)? Also if I hit "pause" during a file run it immediateing pauses, is there a setting that raises the router up before it pauses?
JMOlshefski
 
Posts: 6
Joined: Tue Jul 01, 2014 4:12 pm

Re: Pendant Menu

Postby OCEdesigns » Mon Mar 18, 2019 8:31 am

Not sure about a manual for the pendant. I have looked for this also with no luck. I have found several different threads and such but no actual manual. As for the pause there is no setting to raise the Z before the pause. I usually wait until it raises and quickly hit pause.
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 9.5
OCEdesigns
 
Posts: 79
Joined: Fri Jan 11, 2019 8:26 am

Re: Pendant Menu

Postby cbhelms » Mon Mar 18, 2019 1:25 pm

I don't have the Pendant, but there is some information in the CNC Shark HD4's Owner Manual about setting it up and how to operate it. Go to Next Wave Automation website and look for all the manuals. Hope this will help you get it figured out.

Colin Helms
cbhelms
 
Posts: 18
Joined: Mon Dec 26, 2011 8:35 pm
Location: Charlotte, NC

Re: Pendant Menu

Postby OCEdesigns » Mon Mar 18, 2019 3:34 pm

The owners Manual only give basic user info. It doesn't get into the details of other settings and adjustments.
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 9.5
OCEdesigns
 
Posts: 79
Joined: Fri Jan 11, 2019 8:26 am

Re: Pendant Menu

Postby Scheffy » Tue Mar 26, 2019 3:23 pm

I've called NWA about exactly this and they admitted that there's no manual currently, though they said they're working on one.

That being said, the guy I talked to (Russ I think?) was pretty knowledgeable about the features. Might be worth calling them up when you have the pendant in front of you and somebody can run you through some of the more interesting submenus.
Scheffy
 
Posts: 4
Joined: Wed Mar 13, 2019 11:06 am

Re: Pendant Menu

Postby OCEdesigns » Wed Mar 27, 2019 8:45 am

Scheffy wrote:I've called NWA about exactly this and they admitted that there's no manual currently, though they said they're working on one.

That being said, the guy I talked to (Russ I think?) was pretty knowledgeable about the features. Might be worth calling them up when you have the pendant in front of you and somebody can run you through some of the more interesting submenus.




Yeah that is a good idea. I was looking through the settings and I'm sure there is more we can control.
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 9.5
OCEdesigns
 
Posts: 79
Joined: Fri Jan 11, 2019 8:26 am


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 1 guest