Search found 6 matches
- Sun Jan 06, 2019 4:08 pm
- Forum: Everything 4th Axis
- Topic: 4th Axis Ignored Lines
- Replies: 3
- Views: 10128
Re: 4th Axis Ignored Lines
I just ran into a similar issue yesterday. First, the chuck was starting to unscrew itself preventing full rotation. Then, after changing the direction from raster to circular I could hear the stepper motor skipping and the 4th axis head was stuck. I took the side plate off to verify the belt wasn't...
- Sun Jan 06, 2019 3:52 pm
- Forum: Everything 4th Axis
- Topic: Help with lasering with 4th axis
- Replies: 3
- Views: 8520
Re: Help with lasering with 4th axis
I just realized this was a question for Vectric software, not just Shark related. I received an answer from Vectric that said "at this time, it is not possible to laser on the 4th axis". Bummer, that is one of the main reasons I bought this setup...
- Sun Jan 06, 2019 3:50 pm
- Forum: Everything 4th Axis
- Topic: new to 4th axis
- Replies: 4
- Views: 10157
Re: new to 4th axis
I finally found the control on the pendant. I pressed the number box for the Z axis, in the window that opens I found an "A" button that changes the Z control to A control. I never saw that in any video or instruction manual. Maybe it is fairly new?
- Sun Dec 23, 2018 11:18 am
- Forum: Everything 4th Axis
- Topic: new to 4th axis
- Replies: 4
- Views: 10157
Re: new to 4th axis
I hope someone answers this, I have the same issues.... Hi Everyone, As in my previous post I just got my new tool and I am working on getting to work. I have run into a few snags so far. I have been watching the videos that I can and reading everyone's experiences. 1. In the literature during the s...
- Sat Dec 22, 2018 6:26 pm
- Forum: Everything 4th Axis
- Topic: Help with lasering with 4th axis
- Replies: 3
- Views: 8520
Help with lasering with 4th axis
I have searched the forum, but come up empty. I am trying to laser engrave on a wooden travel mug using the 4th axis. If I use the laser PP, the gantry moves in the Y axis. If I use the rotary PP, the laser won't light up. What am I doing wrong? I am two weeks behind on this project for Christmas an...
- Wed Nov 14, 2018 9:44 am
- Forum: Setting up the Shark
- Topic: Getting bits out of water-cooled spindle
- Replies: 7
- Views: 7795
Re: Getting bits out of water-cooled spindle
My original collet was marked with a "6", 6mm?? I took it out and installed the 1/4" marked collet.