Search found 17 matches
- Wed Dec 29, 2010 7:18 pm
- Forum: CNC Shark
- Topic: Life of Bosch Router
- Replies: 24
- Views: 14586
Re: Life of Bosch Router
Colt router Life.... I have the very first colt that I bought with my machine...THREE years ago. About once a year....it gets some raspy noises coming from it....and if let run longer will start slowing down and eventually stop. Change brushes ...and it works like brand new. Once I found this out......
- Tue Nov 02, 2010 11:14 am
- Forum: Software. Programming
- Topic: Feed speed
- Replies: 3
- Views: 3844
Re: Feed speed
Van, You did not mention your depth of cut. This will factor in too. I cut hardwoods at 100 ipm with a .125 bit...and 50-75 ipm with a .25 bit on the rough side. I do this with .1 doc on .25 mill...and .050 doc on the .125 mill. The .031 ball is a bit trickier...you can run it 100+ ipm....ONLY IF......
- Tue Nov 02, 2010 7:58 am
- Forum: Software. Programming
- Topic: Probe Software
- Replies: 8
- Views: 5946
Re: Probe Software
Rob, One thing I forgot to add... When you scan something...it comes into the 3d program huge. Like 10-15x size. You will have to reduce size till you get it proportional with what you scanned. I scanned a 5 inch part...and when I opened the .stl, it was about 75 inches. Thats a good thing tho...it ...
- Mon Nov 01, 2010 8:18 pm
- Forum: Software. Programming
- Topic: Probe Software
- Replies: 8
- Views: 5946
Re: Probe Software
Rob, When I installed the new updated control panel ...I ended up with TWO control panels....one is the old one with no scan tab (Basic Panel). The second one (Basic Panel Scan) has the scan tab. You will know the difference when first trying the panel as it asks for an unlock key if its the Scan ve...
- Mon Nov 01, 2010 7:45 pm
- Forum: Shark Pro
- Topic: Table Upgrade
- Replies: 0
- Views: 3400
Table Upgrade
Thought i'd post my upgrades and table made for my pro. I bought my shark almost 2 years ago. The table was a bit bowed...so I started building...and ended up making a heavy base and table to hold things flat. The table plate has drilled and tapped holes for clamping and is made of .75 thick aluminu...
Re: Probe
Burt,
I just posted a scan result in the projects section. It will give you an idea what the probe can do.
If you have any questions...pm me..
Teir
I just posted a scan result in the projects section. It will give you an idea what the probe can do.
If you have any questions...pm me..
Teir
- Sat Oct 30, 2010 12:33 pm
- Forum: Show off your CNC Shark projects
- Topic: Scan Probe
- Replies: 1
- Views: 3775
Scan Probe
HI, It was suggested I post a scan in here to show some folks what it can do. This was a scan of a plastic bait about one inch tall by 2 inches long. It picked up all the small details like scales, eyes, fins ect and it was set on .010 resolution. I am really happy with the probe.... Enjoy.. Teir
- Mon Oct 25, 2010 7:32 am
- Forum: Software. Programming
- Topic: Probe Software
- Replies: 8
- Views: 5946
Re: Probe Software
Tim, Thanks...I look forward to it. I have a customer I have been putting off that needed scan done. ---------------- Rob, It is very easy to operate. Tim had told me that it might stick the first time or two I used it...and it did. After that it has been pretty reliable. You would not believe the d...
- Wed Oct 20, 2010 8:18 am
- Forum: Software. Programming
- Topic: Probe Software
- Replies: 8
- Views: 5946
Probe Software
Hello, I bought the touch probe 2 months ago and use it occasionaly. I didn't pay attention that I would need to register for a passcode when I installed it. Now it has gone off probation period and needs the passcode to work. I have send at least 2 emails to towens@nextwaveautomation.com over the l...
- Fri Sep 03, 2010 6:59 pm
- Forum: Software. Programming
- Topic: Load error
- Replies: 17
- Views: 16400
Re: Load error
Tim, I updated my software while i was at IWF..the 3rd day of IWF.....in anticipation of the probe. Since I got back from IWF....I have updated firmware on the shark with laptop hooked up. Probe was sticky as you told me it might be for the first scan or two. Then it cleared right up. I have run sca...