CNC Shark Forum

I replicated the problem and pinpointed the issue. I confirmed the cause of the problem. Previous posts of the problem, cause, and solution in this thread regarding the Screw Rod / Stepper Motor Coupling are accurate and I appreciate the input that lead to me replicating the problem and confirming t...

I tested the machine with no wood and the router off again and it did shift on the X-Axis and made the motor made the sound it makes when you jog to the limit of the machine when it its the edge of the guide rail and support gantry. I took apart the whole machine and looked for any mechanical damage...

Thanks for the responses. Sorry for my late response. I will check all mechanical issues thoroughly. I will post when I have found the issue since I also believe it is more than likely mechanical after doing some diagnostics. Bob, none of my posts regarding this problem had a detailed method of how ...

Yep I have also powered down the controller, just forgot to list it. I'm going to call Rockler and see how they can help out.

I have owned the CNC Shark for less than a month and there are some issues that I have been having with my machine. The machine will Shift/Jump its task in either direct by roughly an inch randomly. When it does this it completely ruins the project and an expensive piece of fine wood. I will press E...