using a mac with the shark

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
printer
Posts: 1
Joined: Sun Sep 19, 2010 5:19 pm

using a mac with the shark

Post by printer »

what is the process of using a mac with the shark system?

User avatar
Buc
Posts: 548
Joined: Mon Aug 16, 2010 9:34 pm
Location: Waterford, PA

Re: using a mac with the shark

Post by Buc »

http://www.rockler.com/product.cfm?page=25376. According to the overview on this page, not compatible with Mac.
I have not failed. I've just found 10,000 ways that won't work.

Thomas A. Edison

The Only Easy Day Was Yesterday

Tim Owens
Posts: 361
Joined: Wed Jul 28, 2010 3:51 pm

Re: using a mac with the shark

Post by Tim Owens »

Neither the CNC Shark Control panel nor the Vcarve will run on Mac OS. However several people have gotten it to work either on a dual boot machine or running an emulator for windows. I am not a mac user so I would not know the procedure but I thought I would toss that out there for anyone that has done it and might want to add.

Post Reply