error message saving CNCShark USB-ARCS INCH.tap

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
joe48234
Posts: 6
Joined: Tue Aug 03, 2010 5:42 pm

error message saving CNCShark USB-ARCS INCH.tap

Post by joe48234 »

Hi,
I got the following when trying to save tap file

Failed to execute Program
C:Program files(x86)\CNCShark Basic Panel\CNSharkControlPanel.exe
Saved tap using CNCShark USB-ARCS INCH.tap
Top
sk8nmike
Posts: 389
Joined: Thu Dec 01, 2011 7:35 am
Location: Carrollton, Tx

Re: error message saving CNCShark USB-ARCS INCH.tap

Post by sk8nmike »

Looks like you selected the wrong post processor in V-Carve use the CNCShark USB-ARCS INCH
Top
Post Reply

Return to “Software. Programming”