Cutting 3d

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
gpeck
Posts: 181
Joined: Fri Sep 06, 2013 1:35 pm

Cutting 3d

Post by gpeck »

When I upgraded from 7.5 to 8.0 for 175.00 there was some clipart that was included in the upgrade. I see that their are some 3d images, but to get anything realy good you have to buy them at design and make. I am looking at making a western or wilderness mantel. Is there another place a little cheaper to find 3d clipart? Thanks for any information Gene

User avatar
Kayvon
Posts: 552
Joined: Tue Oct 21, 2014 11:46 pm

Re: Cutting 3d

Post by Kayvon »

Yikes... I didn't realize they're charging $25 for a model. I have seen STL files for sale on eBay and AliExpress for a couple dollars. Try going to AliExpress and searching "cnc horse".

Kevink18
Posts: 205
Joined: Fri Nov 23, 2012 3:30 pm

Re: Cutting 3d

Post by Kevink18 »

I have bought a lot from ebay and they are excellent designs and cut real good. Just search .stl

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Cutting 3d

Post by tonydude »

I have bought some from here, cheap.

http://www.ss3dmodels.com/any

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply