i can't cut arcs
Posted: Mon Dec 17, 2018 9:19 pm
I cannot cut arcs. Followed VCarve instructions, created a closed vector (a polyline with an arc for a profile cut), created a TAP file with the CNCShark-USB NewArcsc (mm) PP but my Shark II won't cut the arc. There are 2 little notches at the bottom where arc begins to be cut, but turns and forms a straight line. Got the VCarve file, the TAP and a photo of the finished "product".
https://drive.google.com/drive/folders/ ... sp=sharing
Could y'all please help?
Thank YOU,
Matt Holland
HollandCraft
p.352.470.9280
https://drive.google.com/drive/folders/ ... sp=sharing
Could y'all please help?
Thank YOU,
Matt Holland
HollandCraft
p.352.470.9280