Received Software on Disc. Computer has not disc drive

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

Received Software on Disc. Computer has not disc drive

Postby bayoufamily » Sun Aug 18, 2019 7:40 am

I purchased my CNC Machine used. Was given the disc with software as well as the license codes. My computer does not have a disc drive. Is there anyway to download the software without having to pay for it again using my license codes and registered user names from the disc? I looked around but do not know where to get the software.
bayoufamily
 
Posts: 2
Joined: Fri Aug 16, 2019 9:14 am

Re: Received Software on Disc. Computer has not disc drive

Postby bayoufamily » Sun Aug 18, 2019 7:41 am

It is the CNC Shark / Piranha / FX. Software is Next Wave Automation & Vectric
bayoufamily
 
Posts: 2
Joined: Fri Aug 16, 2019 9:14 am

Re: Received Software on Disc. Computer has not disc drive

Postby jeb2cav » Sun Aug 18, 2019 7:53 am

I would take the time to contact NWA via phone and register your machine as the 'new' owner. I'm not sure their automated system will support this.

You will find the NWA control software download here - https://www.nextwaveautomation.com/downloads-links. As I'm not familiar with your model machine I'm not sure you will need it or not.

I would go to the Vectric site - https://www.vectric.com/ - and send an email to support with your Vectric product code explaining that you purchased this from previous owner and go from there. They may be able to provide a download link to that version of VCarve. You might also try finding a friend with a disc drive and transferring to a thumb drive.

Good luck!
jeb2cav
Site Admin
 
Posts: 1527
Joined: Thu Sep 30, 2010 7:04 pm
Location: Kentucky

Re: Received Software on Disc. Computer has not disc drive

Postby Kayvon » Mon Aug 19, 2019 1:44 pm

Take the disc to another computer (a friend's or the library's?) and copy the contents to a thumb drive.
User avatar
Kayvon
 
Posts: 415
Joined: Tue Oct 21, 2014 11:46 pm

Re: Received Software on Disc. Computer has not disc drive

Postby bill z » Sat Aug 24, 2019 8:21 am

It is unfortunate about the optical disk, but office supply places will convert for you also (for a small fee). Staples, Office Depot...

Try schools, like High schools or local trade collages.

If you go to coffee stores where folks are sitting around drinking coffee looking at their laptops, just maybe they can convert it for you. Some may worry about viruses, but many will trust you, especially if they have seen you enough times.

Let us know how you got the software converted.
User avatar
bill z
 
Posts: 335
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Received Software on Disc. Computer has not disc drive

Postby Barry Anderson » Tue Aug 27, 2019 8:33 pm

You can also use an external disc drive that plugs in to a USB Port.
Barry Anderson
Barry Anderson
Anderson Custom Woodwork, Inc.
Barry Anderson
 
Posts: 52
Joined: Sun Dec 21, 2014 9:55 pm

Re: Received Software on Disc. Computer has not disc drive

Postby Pawarnikhil » Wed Nov 27, 2019 12:11 am

Helpful thread! Thank you!
Pawarnikhil
 
Posts: 1
Joined: Thu Nov 14, 2019 11:29 pm


Return to Software. Programming

Who is online

Users browsing this forum: No registered users and 1 guest