Laser Processor not showing in drop down box

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
dhruska
Posts: 2
Joined: Thu Jul 04, 2019 8:45 am

Laser Processor not showing in drop down box

Post by dhruska »

I have made a few projects a few months ago with my laser attachment. Prior to downloading the newest version of VCarve Desktop - 10.507 - the drop down box included the processor: CNC Piranha - Laser (inch) (*.tap). This processor is not in the drop down box in the new Version 10.507. Where can I get this processor added back to my drop down box so I can work my laser attachment?

User avatar
Kayvon
Posts: 552
Joined: Tue Oct 21, 2014 11:46 pm

Re: Laser Processor not showing in drop down box

Post by Kayvon »

Look in the Postp folder, which contains the post processor files. Here's how you get to it:
https://support.vectric.com/aspire-ques ... lder-on-pc

You just need to copy over the Piranha file that you added to your last version so it exists in your new version.

dhruska
Posts: 2
Joined: Thu Jul 04, 2019 8:45 am

Re: Laser Processor not showing in drop down box

Post by dhruska »

Thank you. I was able to find the files I needed in an earlier version of the software and copy them into the updated version. Thank you for your help.

User avatar
Kayvon
Posts: 552
Joined: Tue Oct 21, 2014 11:46 pm

Re: Laser Processor not showing in drop down box

Post by Kayvon »

Glad it worked out for you. Thanks for posting a follow up! It's always fulfilling to see that it worked out.

Post Reply