Quick question, I ran a search for Linux but found nothing helpful.
Can I run Linux and interface with my SD110?
I'm guessing no, but there's always hoping.
Can I run Linux?
Moderators: al wolford, sbk, Bob, Kayvon
Re: Can I run Linux?
Nope
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Can I run Linux?
Well poo...
Ah well, perhaps when I get something bigger...
Thanks for the reply!
Ah well, perhaps when I get something bigger...
Thanks for the reply!
Re: Can I run Linux?
Been a linux fan for the last 25 years, both at work and at home. Sadly, Vectric software works only on Windows. You might consider VMWare and add Windows as a virtual machine. The solution is similar for Mac users.
Fred
Shark HD520, JTech Laser, 4thAxis
Aspire v11.5
Shark HD520, JTech Laser, 4thAxis
Aspire v11.5
Re: Can I run Linux?
sadly, the USB interface won't be "real-time enough" for the CNC controlling software to work properly. Vectric probably will work just fine, however.
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)