Discussion/questions about software used with your CNC Shark and programming issues
Moderators: al wolford, sbk, Bob, Kayvon
- Posts: 1
- Joined: Sat May 14, 2022 12:56 pm
How can I restart job if the flash drive stopped reading, the TouchPad had to be restarted.
- Posts: 544
- Joined: Tue Oct 21, 2014 11:46 pm
There's no way to pick up where you left off. If you can reset the gantry to the exact starting position, you can rerun the entire job.
- Posts: 38
- Joined: Mon Aug 17, 2020 3:47 pm
- Location: Ozark Mo
I found the pendant to be very sensitive to vacuum created static electricity. Keep that vacuum hose away from the controller and most of those issues will not be a problem.