Wooden Cross Puzzle

Share your Shark projects with other forum members!

Moderators: sbk, al wolford

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.

Wooden Cross Puzzle

Postby Stoelle » Wed Dec 23, 2015 3:19 pm

After seeing a number of wooden puzzles at a kiosk in our local mall, I thought I would try my hand in building a "simple wooden cross" puzzle. I used 3/4 inch stock to create this one, but it could be made at a number of different dimensions with modification. The puzzle consists of six pieces, each three inches long. I used a 1/8 inch end mill bit to cut out the pieces and the side cuts needed to be squared with a chisel or band saw in order for the pieces to fit snugly. After a little sanding and some wood wax, the pieces seem to fit fairly well.

You can search the internet for a solution to the puzzle using the search terms "simple wooden cross puzzle".

Using VCarvePRO 8.0 and a CNC Shark Black Diamond ....
Puzzle solved.JPG
Solved puzzle

Cut out.JPG
Cut out pieces with tabs on ends

Wooden Cross Puzzle.crv
VCarve 8.0 project file
(266.5 KiB) Downloaded 365 times
Posts: 2
Joined: Tue Dec 22, 2015 2:10 pm

Re: Wooden Cross Puzzle

Postby Bob » Wed Dec 23, 2015 7:56 pm

Thank you Stoelle,
I will enjoy tormenting my friends. :twisted:
User avatar
Posts: 1104
Joined: Sun Aug 08, 2010 3:35 pm

Re: Wooden Cross Puzzle

Postby Stoelle » Thu Dec 24, 2015 5:55 pm

Here's a link to a site that shows a solution to the puzzle:
Posts: 2
Joined: Tue Dec 22, 2015 2:10 pm

Activation With Product Key

Postby taylorross882 » Tue May 14, 2019 11:50 am

And provide the guideline about how to the active product using production key, how to download in other devices and how to reinstall the security product if needed. office.com/setup | norton.com/setup
Posts: 1
Joined: Tue Apr 30, 2019 11:25 am

Return to Shark Project File Sharing.

Who is online

Users browsing this forum: No registered users and 1 guest