Are these lubes good?
Moderators: ddw, al wolford, sbk, Bob, Kayvon
-
- Posts: 7
- Joined: Thu Nov 09, 2017 10:21 pm
Are these lubes good?
Hi, looked up this topic but all I found were posts from 2014 & 2016! Lol just need to know if either of these will do anything to my HD4. Thanks
- Attachments
-
- 2612722.jpg
- (6.55 KiB) Not downloaded yet
-
- 2612717.jpg
- (6.57 KiB) Not downloaded yet
Re: Are these lubes good?
I asked Nextwave the very same subject and this is what they said:
Clean the guide rods and lead screws with WD-40 and then lubricate with a dry teflon/silicone spray or graphite.
This is a link to what we suggest and sell for machine lubrication: http://shop.nextwaveautomation.com/shop ... ?itemid=40
Regards,
Next Wave Automation tech support
One of the links you provided was WD40 with PTF which is Teflon (sort of), it should work.
Clean the guide rods and lead screws with WD-40 and then lubricate with a dry teflon/silicone spray or graphite.
This is a link to what we suggest and sell for machine lubrication: http://shop.nextwaveautomation.com/shop ... ?itemid=40
Regards,
Next Wave Automation tech support
One of the links you provided was WD40 with PTF which is Teflon (sort of), it should work.
-
- Posts: 7
- Joined: Thu Nov 09, 2017 10:21 pm
Re: Are these lubes good?
Thanks, I ended up buying both