Welcome to CNC Shark Talk!

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Posts: 3
Joined: Mon Aug 10, 2020 8:05 am

Re: Welcome to CNC Shark Talk!

Post by kerrybills11 »

Hello guys, I am Kerry. new member in this community. I am USA

Posts: 1
Joined: Mon Mar 29, 2021 10:40 am

Re: Welcome to CNC Shark Talk!

Post by Classicowl »

Hi Im new to the forum and have a new HD5 that I am setting up. The set up instructions say that the ending link in the cable carrier has a magnet but mine only has a bolt with a lock nut. Is this a problem? Also which cable is supposed to go into the carrier? There is the thin one off the gantry and a thick one...both will not fit in the carrier. I'd appreciate someone's clarification.

Posts: 14
Joined: Sun Apr 02, 2017 9:46 am

Re: Welcome to CNC Shark Talk!

Post by Janettx »

I attended the Randy Johnson LCD Touchscreen Pendant Setup and Operation
Thursday, July 8, 2021, and was wondering if he posted the video somewhere. The next wave page for videos is hard to figure out because I can't see how to log in. Any help will be appreciated :)

Posts: 3
Joined: Wed Nov 03, 2021 12:55 pm

New Member - Excited!

Post by TIAEngineering »

Taking my first baby steps into CNC machining with a Piranha HD100.
Looking forward to getting some well educated advice from the members here as I work to understand the craft.

Thank you all in advance!

Posts: 1
Joined: Thu Mar 03, 2022 10:13 am

Re: Welcome to CNC Shark Talk!

Post by jnsmb »

Hi All,
Thanks for the welcome. I'm considering buying a 2014 hd2 anniversary edition, but I'm not sure if it's worth it. Would like to ask a few questions if possible. Thanks again for the welcome.

Post Reply