CNC Shark G-code & Mastercam compatibility
Moderators: ddw, al wolford, sbk, Bob, Kayvon
CNC Shark G-code & Mastercam compatibility
I use Mastercam with a variety of cnc machines. A friend of mine purchased the CNC shark pro. We were discussing the compatibility possibilities of using Mastercam to design and post process files for the CNC Shark. Has anyone used Mastercam with the CNC Shark? Do you know if Mastercam has a post processor for the CNC Shark? Is there a complete listing of the G-Code commands for the CNC Shark? I'd appreciate any help available or even a phone number to contact someone that knows how the CNC Shark g-code needs to be formatted.
Re: CNC Shark G-code & Mastercam compatibility
I'm looking for the same info. I posted a simular thread and received little help.
http://www.cncsharktalk.com/viewtopic.php?f=10&t=204
I posted a sample program from vcarve and looked at the code. I then altered a stock mastercam post to look like the vcarve program but I would like to learn more. I programed a 1/2 scale archtop guitar top plate with surface finish parallel and cut into pink insulation board without any problems.
http://www.cncsharktalk.com/viewtopic.php?f=10&t=204
I posted a sample program from vcarve and looked at the code. I then altered a stock mastercam post to look like the vcarve program but I would like to learn more. I programed a 1/2 scale archtop guitar top plate with surface finish parallel and cut into pink insulation board without any problems.