NO TOUCH PLATE

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
SteveM
Posts: 168
Joined: Thu Sep 08, 2016 1:29 pm
Location: Franklin, Wisconsin

Re: NO TOUCH PLATE

Post by SteveM »

I sent you a PM, but you could use a piece of paper and just put it on top of the piece you are going to cut. Just lower the bit till it drags while you are sliding the paper back and forth.
It should work fine for the time being.

Post Reply