Butt Impression Please

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Butt Impression Please

Postby bill z » Mon May 27, 2019 6:26 pm

I Figure on making some stools with butt impression seats (carved chair seats) but I do not have any ideas on dimensions (what is considered standard (is there such a thing?)).

Probably use VCarve, 3D carving and a round bull nose bit to do most of the work. Only guessing here.

Can't find any Youtube about Vetric and chair bottoms. I may check out how to do spoons and go from there.

Ideas and help please.
User avatar
bill z
 
Posts: 318
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Butt Impression Please

Postby bill z » Sat Jun 15, 2019 8:52 am

With nothing that I could find to go on, I started to draw something symmetric.

I'm still looking for suggestions here.

Figuring something like 24" wide, 20" deep on a 2" thick board but only cutting 1" deep, this is what I came up with. Interesting enough, I figure I'll have to carve it and try it out for me to know if it is even close.
Attachments
SeatBottom.jpg
Contoured Seat Bottom
User avatar
bill z
 
Posts: 318
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Butt Impression Please

Postby sharkcutup » Sat Jun 15, 2019 11:14 am

Something like this?
Tractor Seat Model B.jpg


I have some tractor seat models at hogancnccrafts.com that might help.

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts.com
sharkcutup
 
Posts: 339
Joined: Tue Mar 08, 2016 5:23 pm

Re: Butt Impression Please

Postby tonydude » Sun Jun 16, 2019 12:03 pm

Here you go just page down for the seats. http://www.designsbyphil.com/3d-file-share.html

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.518, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1509
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Postby bill z » Sun Jun 16, 2019 4:12 pm

sharkcutup wrote:Something like this?
Tractor Seat Model B.jpg


I have some tractor seat models at hogancnccrafts.com that might help.

Sharkcutup


Yes Sharkcutup. What are the dimensions? How wide, long and deep? The dimensions will really help me.

Thanks.
User avatar
bill z
 
Posts: 318
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Butt Impression Please

Postby tonydude » Mon Jun 17, 2019 7:55 am

hogancnccrafts.com, fake site, don't work

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.518, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1509
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Postby tonydude » Mon Jun 17, 2019 7:58 am

seats.PNG
Bill Z take a look here and download the files http://www.designsbyphil.com/3d-file-share.html

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.518, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1509
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Postby sharkcutup » Mon Jun 17, 2019 7:59 am

17" x 17" x 2.0"

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts.com
sharkcutup
 
Posts: 339
Joined: Tue Mar 08, 2016 5:23 pm

Re: Butt Impression Please

Postby Kassim27 » Mon Jun 24, 2019 3:16 pm

tonydude wrote:Here you go just page down for the seats. http://www.designsbyphil.com/3d-file-share.htmlparis airports transfers

Tony

Thank you very much
Kassim27
 
Posts: 1
Joined: Thu Jun 20, 2019 8:49 pm


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 2 guests