Butt Impression Please

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Post Reply
User avatar
bill z
Posts: 335
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Butt Impression Please

Post by bill z »

I Figure on making some stools with butt impression seats (carved chair seats) but I do not have any ideas on dimensions (what is considered standard (is there such a thing?)).

Probably use VCarve, 3D carving and a round bull nose bit to do most of the work. Only guessing here.

Can't find any Youtube about Vetric and chair bottoms. I may check out how to do spoons and go from there.

Ideas and help please.

User avatar
bill z
Posts: 335
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Butt Impression Please

Post by bill z »

With nothing that I could find to go on, I started to draw something symmetric.

I'm still looking for suggestions here.

Figuring something like 24" wide, 20" deep on a 2" thick board but only cutting 1" deep, this is what I came up with. Interesting enough, I figure I'll have to carve it and try it out for me to know if it is even close.
Attachments
Contoured Seat Bottom
Contoured Seat Bottom

sharkcutup
Posts: 365
Joined: Tue Mar 08, 2016 5:23 pm

Re: Butt Impression Please

Post by sharkcutup »

Something like this?
Tractor Seat Model B.jpg
I have some tractor seat models at hogancnccrafts.com that might help.

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts.com

tonydude
Posts: 1547
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Post by tonydude »

Here you go just page down for the seats. http://www.designsbyphil.com/3d-file-share.html

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

User avatar
bill z
Posts: 335
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Butt Impression Please

Post by bill z »

sharkcutup wrote:Something like this?
Tractor Seat Model B.jpg
I have some tractor seat models at hogancnccrafts.com that might help.

Sharkcutup
Yes Sharkcutup. What are the dimensions? How wide, long and deep? The dimensions will really help me.

Thanks.

tonydude
Posts: 1547
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Post by tonydude »

hogancnccrafts.com, fake site, don't work

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

tonydude
Posts: 1547
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Butt Impression Please

Post by tonydude »

seats.PNG
Bill Z take a look here and download the files http://www.designsbyphil.com/3d-file-share.html

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

sharkcutup
Posts: 365
Joined: Tue Mar 08, 2016 5:23 pm

Re: Butt Impression Please

Post by sharkcutup »

17" x 17" x 2.0"

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts.com

Kassim27
Posts: 1
Joined: Thu Jun 20, 2019 8:49 pm

Re: Butt Impression Please

Post by Kassim27 »

tonydude wrote:Here you go just page down for the seats. http://www.designsbyphil.com/3d-file-share.htmlparis airports transfers

Tony
Thank you very much

Post Reply