Pendant not recognizing USB drive

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
Aintright
Posts: 2
Joined: Tue Jun 18, 2019 7:47 am

Pendant not recognizing USB drive

Post by Aintright »

My pendant on My Shark HD 4 use to recognize my USB thumb drive but it will no longer do so. I have tried the thumb drives that use to work and they are no longer recognized either.
I can leave the drive inserted and turn off and on my CNC then it shows my files but when I try to open 1 it goes back to the home screen on the pendant. Can Someone Help Me, please?

Aintright
Posts: 2
Joined: Tue Jun 18, 2019 7:47 am

Re: Pendant not recognizing USB drive

Post by Aintright »

Also, My laser worked also, It no longer works either :(

Janettx
Posts: 14
Joined: Sun Apr 02, 2017 9:46 am

Re: Pendant not recognizing USB drive

Post by Janettx »

Is there an answer to this????

User avatar
Kayvon
Posts: 552
Joined: Tue Oct 21, 2014 11:46 pm

Re: Pendant not recognizing USB drive

Post by Kayvon »

Have you tried searching the forum for this? There are several threads about this already, so many are reluctant to repeat themselves.

Some examples:
https://www.cncsharktalk.com/viewtopic.php?f=15&t=5376
https://www.cncsharktalk.com/viewtopic.php?f=7&t=3990
https://www.cncsharktalk.com/viewtopic.php?f=10&t=5833

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Pendant not recognizing USB drive

Post by Bob »

In addition, Was Next Wave ever contacted? They are always my first choice when I have a question.
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

Post Reply