Bosch colt changed

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Post Reply
zanemeis
Posts: 29
Joined: Wed Aug 04, 2010 10:53 pm

Bosch colt changed

Post by zanemeis »

I have an original shark, I ordered a colt router from the local lumber yard and it will not fit my machine. I have not measured the housing but it is larger than the original colt.
the new one also has a plastic housing versus the metal on the old one.

tonydude
Posts: 1546
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Bosch colt changed

Post by tonydude »

Contact nextwave and find out if they have a router clamp to fit it. https://www.nextwaveautomation.com/shop/Parts-c31027749

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

User avatar
Bob
Posts: 1144
Joined: Sun Aug 08, 2010 3:35 pm

Re: Bosch colt changed

Post by Bob »

There are two Colts available. This sounds like the one you need. https://www.rockler.com/bosch-colt-1-hp ... alm-router
Bob

Post Reply