Y Axis skipping/stopping when engraving

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
kferb
Posts: 8
Joined: Tue Nov 13, 2018 10:35 am

Y Axis skipping/stopping when engraving

Post by kferb »

I just received my 520 and am having problems with sudden skipping (slight stopping) of the gantry while engraving. It seems to only happen on the Y axis. I tried tightening the set screw on the Y axis motor and it was already tight. There does not appear to be any obstructions on the guide rails. I’m not sure what else to do.

Post Reply