Vectric Desktop v11.005

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
RMC_Florida
Posts: 1
Joined: Thu Apr 22, 2021 7:44 am

Vectric Desktop v11.005

Post by RMC_Florida »

I have a Next Wave CNC Shark sd110 and exclusively use Vectric Desktop SW. I use the Touch Screen Pendant (with USB Memory stick) as my controller interface.
When using v10 the code runs instantly when pressing start and the arms are moving instantaneously. The new v11 has a delayed start of ~5-7 seconds before any movement. In searching the G-code, there is no G04 present. What changed between versions/patch?
NOTE: In checking with Vectric website, under post processors, it appears they added a 6-second delay (added as of 6/11/21). Curious as to why!?!
Attachments
VECTRIC.jpg

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: Vectric Desktop v11.005

Post by Rando »

RMC_Florida:

Likely to allow the spindle to come up to speed, in cases where the user purchased the new controller-set spindle speed.

Cheers!

Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Vectric Desktop v11.005

Post by tonydude »

Here is the reply from nextwave

https://nextwaveautomation.zendesk.com/ ... 3024275085

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply