I have a Next Wave CNC Shark sd110 and exclusively use Vectric Desktop SW. I use the Touch Screen Pendant (with USB Memory stick) as my controller interface.
When using v10 the code runs instantly when pressing start and the arms are moving instantaneously. The new v11 has a delayed start of ~5-7 seconds before any movement. In searching the G-code, there is no G04 present. What changed between versions/patch?
NOTE: In checking with Vectric website, under post processors, it appears they added a 6-second delay (added as of 6/11/21). Curious as to why!?!
Vectric Desktop v11.005
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Re: Vectric Desktop v11.005
RMC_Florida:
Likely to allow the spindle to come up to speed, in cases where the user purchased the new controller-set spindle speed.
Cheers!
Rando
Likely to allow the spindle to come up to speed, in cases where the user purchased the new controller-set spindle speed.
Cheers!
Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Re: Vectric Desktop v11.005
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.