CNC Shark Forum

I ended up finding an answer on another forum ( https://forum.vectric.com/viewtopic.php?f=38&t=23640 ).

Basically you just increase the feed rate by alot, it would be more ideal to only increase the feed rate that is to be converted into the A axis rotational movement, but I cannot seem to find a means to do that within the Vcarve 9.5 software, or the Shark CNC.

Rotational speed is the speed at which an object rotates around a fixed axis. It is most commonly measured in revolutions per minute (RPM).

Rotational speed can be calculated by dividing the distance traveled by the time it took to travel that distance .