Norwegian design clock
Moderators: al wolford, sbk, Bob, Kayvon
Norwegian design clock
I made this clock for my wife's sewing room. Since she has a Norwegian heritage, she wanted a clock similar in design to what we saw in Norway. I scanned the picture, imported it into Vectric, then I used it as a guide to draw one corner of the clock. Using the mirror image function a couple of times the clock drawing was completed. I used a 1/8" point cutting round over bit and the quick engrave feature to create a carved look for the clock.
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)
Antonie Van Leeuwenhoek (Developer of the microscope.)
-
- Posts: 191
- Joined: Wed Aug 04, 2010 11:28 am
Re: Norwegian design clock
Bob - Nice job on the design / carving, but you can't see the gears. I'm sure there is an impressive cnc cut set of clockwork behind the clock face. Right?
Ed
![Wink ;)](./images/smilies/icon_e_wink.gif)
Ed
Re: Norwegian design clock
Ed.
I would guess that cnc was used somehow in the production of the clockworks...but not with my Shark.
Bob
I would guess that cnc was used somehow in the production of the clockworks...but not with my Shark.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)
Antonie Van Leeuwenhoek (Developer of the microscope.)
Re: Norwegian design clock
Very nice work. Love the design. I plan on doing some clocks also.
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.