Text on Text wedding sign. Size is 7" x 13" made out of cherry. Done this in aspire, took about 4 hrs to carve using a .125 ball nose bit.
Tony
Text on text wedding sign
Moderators: al wolford, sbk, Bob, Kayvon
Text on text wedding sign
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Text on text wedding sign
Done several of these ever since you posted you step by step instructions. One of the coolest designs around. Once again Tony, thanks.
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Re: Text on text wedding sign
Tony another good job. Can you refer me to your previous instructions on text on text. I have tried with no avail.
Thanks
Bob
Thanks
Bob
Re: Text on text wedding sign
BobA,
I used aspire to do text on text signs which is easier than vcarve pro. Hope this helps. I don't think I did a write up of how to do this.
Tony
I used aspire to do text on text signs which is easier than vcarve pro. Hope this helps. I don't think I did a write up of how to do this.
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Text on text wedding sign
Look under Tony's post "Another Text on Text" post. Not too far back in the Projects portion of this forum. He explains pretty much step by step procedures.
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Re: Text on text wedding sign
Aspire users, http://www.cncsharktalk.com/viewtopic.p ... structions
nice simple instructions, works great.
nice job, on your sign Tony.
nice simple instructions, works great.
nice job, on your sign Tony.
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
The Only Easy Day Was Yesterday
Thomas A. Edison
The Only Easy Day Was Yesterday