CNC Shark HD4 Extended

How-to videos on the CNC Shark

Moderators: sbk, al wolford

CNC Shark HD4 Extended

Postby Snowman » Fri Mar 15, 2019 8:19 pm

I'm looking for information on how to make a canoe paddle on the Shark CNC using Vcarve 9.5 Pro or Aspire 9.5. I would also like to custom engrave the paddle. Anyone having knowledge of how this could be accomplished, would be greatly appreciated.

P.S. I am new to the CNC world and have limited knowledge on both software packages.

Thanks to all helpful forum members for your assistance.
Snowman
 
Posts: 5
Joined: Mon Mar 11, 2019 5:43 pm

Re: CNC Shark HD4 Extended

Postby tonydude » Fri Mar 15, 2019 9:59 pm

Look at the training videos, lots to learn.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.518, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1509
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: CNC Shark HD4 Extended

Postby OCEdesigns » Mon Mar 18, 2019 8:33 am

Watch as many video Tutorials as you can! I watched several hours of them before even attempting my very first very basic project. Start with several simple projects and work up to the paddle.
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 9.5
OCEdesigns
 
Posts: 86
Joined: Fri Jan 11, 2019 8:26 am

Re: CNC Shark HD4 Extended

Postby Snowman » Mon Mar 18, 2019 10:40 pm

Thanks for the advice. :)
Snowman
 
Posts: 5
Joined: Mon Mar 11, 2019 5:43 pm

Re: CNC Shark HD4 Extended

Postby HarryMachen » Mon May 13, 2019 1:00 am

I'm a completely beginner to the scene, so my apologize in advance if this has been asked before. Can you recommend a list of youtube channels for learning?
Resources: babies gear - cookware review - camengo - clever- felicity
Last edited by HarryMachen on Tue May 28, 2019 3:33 am, edited 2 times in total.
HarryMachen
 
Posts: 1
Joined: Sat Apr 20, 2019 12:25 am

Re: CNC Shark HD4 Extended

Postby Kayvon » Mon May 13, 2019 4:11 pm

Vectric has a variety of videos on their site. They are really quite good.
https://support.vectric.com/tutorials/V ... =1&order=1

I can't help but also recommend the actual PDF manual on your hard drive. It's full of descriptions of all the great, hidden functions. Well worth the read, even if you only skim for the interesting parts.
User avatar
Kayvon
 
Posts: 382
Joined: Tue Oct 21, 2014 11:46 pm


Return to CNC Shark videos

Who is online

Users browsing this forum: No registered users and 1 guest