OK I know I am new and just learning. I received the touch plate yesterday and started to try and set it up.......well, the instruction sheet and the shark manual are like to different worlds. Let me say this, my shark has the LCD pendant. I cannot get any of the control panels software to find the controller (seems most people can't either), I followed the instructions in the manual to set it up. No problem, but the V zero, well let's just say, I must be doing something wrong. It will go to the lower left hand corner and do it's thing and then not do anything else. Hope all of this is clear. Any help would be nice. I really don't want to contact support, but may have to.
Hope everyone is having a nice weekend.
HD4 and touch plate
Moderators: al wolford, sbk, Bob, Kayvon
Re: HD4 and touch plate
I am unable to get the Control Panel (3.0) software to work correctly either (on two different PC's)...... But I am able to run the touch plate from the Pendant. ...... I assume that since you say your control panel software won't connect to the controller, your are running the touch plate from the Pendant ?
-
- Posts: 17
- Joined: Wed Mar 08, 2017 11:20 am
Re: HD4 and touch plate
Yes, I am now.....it works like its suppose to...guess I was doing something wrong! Still cannot get the control panel software to find the controller, but from what I have seen I am not the only one!
-
- Posts: 107
- Joined: Fri Nov 08, 2013 10:03 am
- Location: Toledo, Ohio
- Contact:
Re: HD4 and touch plate
Hi all, I no longer work for next wave, but a user contacted me and asked me to read your messages..
CP 2.1 is only for the traditional ncpod non-pendant HD 3 or older one-piece Shark controllers. 1.5h is for the old ncpod two-piece Shark controllers.
my old help site should have those links - http://help.nextwaveautomation.com
2.1 Beta - http://nextwaveautomation.com/Downloads ... 1_Beta.exe
CP 3.0 was being split off into multiple versions. The 3.0 supported both controllers, but the thought was it might be more stable if there were a separate version for each controller.
3.0 Beta - http://nextwaveautomation.com/Downloads ... 0_Beta.exe
The ncPod non-pendant Shark HD 3 and older one-piece controller version was called 2.5.
2.5 Beta - http://nextwaveautomation.com/Downloads ... 5_Beta.exe
The Next Wave Shark Controller with pendant was to be called 3.1.
3.1 Beta - http://nextwaveautomation.com/Downloads ... 0_Beta.exe
They may need to provide you links.. please review their main site under [Downloads] as they likely moved the executable around.
http://shop.nextwaveautomation.com/shop ... x?recid=13
Best Regards, Joseph Poirier - Software Engineer, Winspecs.com
Some people change their minds like every three hours (sometimes generous for people with severe Adult ADD). so working with them can sometimes be challenging because their lack of focus can be damaging to your success. Taking B-Complex every other day and D3 twice a day can really help increase focus.
CP 2.1 is only for the traditional ncpod non-pendant HD 3 or older one-piece Shark controllers. 1.5h is for the old ncpod two-piece Shark controllers.
my old help site should have those links - http://help.nextwaveautomation.com
2.1 Beta - http://nextwaveautomation.com/Downloads ... 1_Beta.exe
CP 3.0 was being split off into multiple versions. The 3.0 supported both controllers, but the thought was it might be more stable if there were a separate version for each controller.
3.0 Beta - http://nextwaveautomation.com/Downloads ... 0_Beta.exe
The ncPod non-pendant Shark HD 3 and older one-piece controller version was called 2.5.
2.5 Beta - http://nextwaveautomation.com/Downloads ... 5_Beta.exe
The Next Wave Shark Controller with pendant was to be called 3.1.
3.1 Beta - http://nextwaveautomation.com/Downloads ... 0_Beta.exe
They may need to provide you links.. please review their main site under [Downloads] as they likely moved the executable around.
http://shop.nextwaveautomation.com/shop ... x?recid=13
Best Regards, Joseph Poirier - Software Engineer, Winspecs.com
Some people change their minds like every three hours (sometimes generous for people with severe Adult ADD). so working with them can sometimes be challenging because their lack of focus can be damaging to your success. Taking B-Complex every other day and D3 twice a day can really help increase focus.
Re: HD4 and touch plate
If you have a HD4, the touch plate plugs into the control box and not the pendant.
It only works plugged into the control box per Next Wave support. At least that is what they told me and when I had my HD4, that is the only way it worked.
I have one for sale if anybody is interested. $55 shipped in the U.S.
It only works plugged into the control box per Next Wave support. At least that is what they told me and when I had my HD4, that is the only way it worked.
I have one for sale if anybody is interested. $55 shipped in the U.S.