Shark HD 5 pendant frozen

Questions/answers/discussion about initial setup of your CNC Shark

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
JimWVR42
Posts: 1
Joined: Sun Feb 16, 2020 7:54 pm

Shark HD 5 pendant frozen

Post by JimWVR42 »

My shark HD 5 pendent freezes at continue when I turn on power
I touch continue and nothing happens. Once, earlier, the machine stopped in the middle of
a project and the message, "lost contact with the controller" came up.
I am on hold till Monday when I can call Next Wave unless someone knows a solution.
Hope someone does, I have projects to do. "portraits in Photo Carve Pro"

jasonellington
Posts: 3
Joined: Sun Feb 28, 2021 9:12 pm

Re: Shark HD 5 pendant frozen

Post by jasonellington »

My controller is doing the same thing. Was there ever a solution given?

David1987
Posts: 1
Joined: Tue Apr 20, 2021 7:36 pm

Re: Shark HD 5 pendant frozen

Post by David1987 »

Mine just started doing the same exact thing!!!! what is going on? how do i fix?

markjonesranger
Posts: 67
Joined: Mon Aug 17, 2020 3:47 pm
Location: Ozark Mo
Contact:

Re: Shark HD 5 pendant frozen

Post by markjonesranger »

I had trouble with it when I vac over it with my shop vac. It didn't like the static discharge. So I don't vac over it anymore and it works great now.

Txbigfoot
Posts: 1
Joined: Mon Aug 16, 2021 1:26 pm

Re: Shark HD 5 pendant frozen

Post by Txbigfoot »

I found that you need to redo the calibration. Restart the machine while pressing the lcd d red. At the prompt to calibrate follow the directions. Works !

Post Reply