CNC Shark Forum

Shark HD 520 purchased January, 2022. While running today, the piece moved, spindle jammed. Control box shut down completely. Has power but no lights come on.
Advice?

Where the power cord plugs into the control box there is a small cover, behind the cover is a small spare fuse. Replace the burned out fuse with this one.
Also , send for more replacements before you need them next time...
Bob

Found the fuse, Thank you.

I added a relay to control the router from this low amp receptacle. I blew about 3 fuses over 2 years. I then added this router relay and no longer have to replace fuses.

https://www.youtube.com/watch?v=GEi3c1ljHjw