no power

Discussion specifically about the Shark's bigger brother, the CNC Shark Pro

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
DAAAAVE
Posts: 3
Joined: Fri Sep 01, 2023 7:19 pm

no power

Post by DAAAAVE »

i have been using my sd110 for a few weeks, went to use it and i am not getting any power to the controller, lights do not light up, computer say's no controller detected when connected directly to it, touch screen controller also not working when i have a thumb drive in it, any help is appreciated.

thanks

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: no power

Post by tonydude »

Look for a fuse in the back below the plug.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

User avatar
Bob
Posts: 1260
Joined: Sun Aug 08, 2010 3:35 pm

Re: no power

Post by Bob »

Dave,
Check the fuse that's inside the end of the power cord where it connects to the controller. There's a tiny cover where the fuse is, and a spare. Please excuse the kind of vague description, but look carefully it is either on the plug or socket.

Also check power to the shop...
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

DAAAAVE
Posts: 3
Joined: Fri Sep 01, 2023 7:19 pm

Re: no power

Post by DAAAAVE »

Thanks, but my controller does not have a little door for a fuse.

User avatar
Bob
Posts: 1260
Joined: Sun Aug 08, 2010 3:35 pm

Re: no power

Post by Bob »

It's a very small storage flap in the outlet. This is a miniature fuse and easy to miss.
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

DAAAAVE
Posts: 3
Joined: Fri Sep 01, 2023 7:19 pm

Re: no power

Post by DAAAAVE »

my controller is not like the ones i have seen in the pictures, there is no little door.

User avatar
Bob
Posts: 1260
Joined: Sun Aug 08, 2010 3:35 pm

Re: no power

Post by Bob »

"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

Post Reply