Hi Folks
Newbie here.
I read a post somewhere on here about the Shark Black Diamonds back plate.
It is the HDPE plate that the Z axis rails attach to.
Rockler had a aluminum replacement but now I can’t find it here or on Rockler.
I think it’s 3/8” by 7” by 36”.
While I’m at it I may as well ask about a router clamp for the Shark.
Can anyone tell me which clamp will work with a PORTER-CABLE 892.
The HDPE plate on the machine is fine just that you have to be careful not to flex it.
I thank you in advance for any helpful reply. Ron:
HDPE plate vs. aluminum
Moderators: al wolford, sbk, Bob, Kayvon
HDPE plate vs. aluminum
If at first you don't succeed, rethink the situation.
Re: HDPE plate vs. aluminum
Ron,
Go to nextwaveautomation for the parts for your machine.They make the shark machines http://shop.nextwaveautomation.com/shop ... itemid=150
Tony
Go to nextwaveautomation for the parts for your machine.They make the shark machines http://shop.nextwaveautomation.com/shop ... itemid=150
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.