Weird cuts, now controller has no power

Discussion about the CNC Shark Pro Plus

Moderators: al wolford, sbk, Bob, Kayvon

Teeffeere
Posts: 1
Joined: Mon Jan 24, 2011 5:44 am
Location: Ghana
Contact:

ey ey

Post by Teeffeere »

cool dude, cool

markjonesranger
Posts: 67
Joined: Mon Aug 17, 2020 3:47 pm
Location: Ozark Mo
Contact:

Re: Weird cuts, now controller has no power

Post by markjonesranger »

My Shark HD510 would blow a fuse from time to time that powered my router. A simple contactor switch relay 120 volt coil and a 2 cheap extension cords and a small box and some spade tips will fix this issue. Controller relay turns on the power to the router relay that powers the router so no more blown fuses when you hit a knot surfacing a plaque with a 2" cutter blade. It just hogs right on through it now. Here is a short video on my relay. Took about 20 minutes to get it going.
https://www.youtube.com/watch?v=GEi3c1ljHjw

Post Reply