Part came loose, hit e-stop on pc screen no power now.

Discussion about the CNC Shark Pro Plus

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
tucker
Posts: 6
Joined: Sat Dec 20, 2014 9:57 pm

Part came loose, hit e-stop on pc screen no power now.

Post by tucker »

:cry: I was in the middle of a cut, when the part came loose during the cutout.
I clicked the e-stop button on the pc screen, and everything shut down as expected.
However, I can't get power to come back on at the control panel.
Any suggestions?

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Part came loose, hit e-stop on pc screen no power now.

Post by tonydude »

Turn the emergency stop button on the control box and it will pop back out. After you hit the stop on the control screen, hit to return home.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply