Wolf in Frame
Moderators: al wolford, sbk, Bob, Kayvon
Wolf in Frame
This was made of oak with a walnut stain. Size is 5" x 7" Took 3 hrs to cut.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Wolf in Frame
nice job tonytonydude wrote:This was made of oak with a walnut stain. Size is 5" x 7" Took 3 hrs to cut.
Tony
Re: Wolf in Frame
That's really nice Tony. Was that all one pattern or did you merge to patterns together in to one project (the frame and the wolf) ? Where did you get them? I didn't one a few years ago during my brief experiences with a Carvewright. I think I got the frame (illegally) from a forum somewhere... which I had it for the Shark. I have since seen it available (just can't remember where) but would have to buy it and just can't afford it right now. Here's the one I made for framing some of my Peyote stitch bead work.
Roger
Roger
CNC Shark HD ~ Control Panel 2.0 ~ Windows 7 & XP
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
-
- Posts: 162
- Joined: Fri Jul 20, 2012 7:07 am
Re: Wolf in Frame
Tony
You're on a roll, Keep up the nice work.
You're on a roll, Keep up the nice work.
Eric the "WoodEraser"
Sun City Center, Florida
If today were perfect there would be no need for tomorrow.
Sun City Center, Florida
If today were perfect there would be no need for tomorrow.
Re: Wolf in Frame
Roger,
the wolf in frame are all in one but can have them seperate too. I also have the frame you got too. Here is one I did before with raccoon.
http://www.cncsharktalk.com/viewtopic.p ... lit=+frame
Tony
the wolf in frame are all in one but can have them seperate too. I also have the frame you got too. Here is one I did before with raccoon.
http://www.cncsharktalk.com/viewtopic.p ... lit=+frame
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
- Larry Gardner
- Posts: 172
- Joined: Sat Mar 05, 2011 7:05 pm
Re: Wolf in Frame
another great piece Tony.. love your work
Larry Gardner
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
-
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Wolf in Frame
Like I said before, I really like this. I think it would look even better , say 1 foot by2 foot! Or larger, what was the carving time?
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Re: Wolf in Frame
The racoon frame one took about 5 hrs the other one 3hrs.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 3
- Joined: Wed Jul 18, 2012 5:35 pm
Re: Wolf in Frame
Tony,
Was this done with Aspire or VCarve Pro? Looks great.
Was this done with Aspire or VCarve Pro? Looks great.
-
- Posts: 229
- Joined: Sun Jan 29, 2012 8:01 pm
- Location: Central Ohio
Re: Wolf in Frame
Another nice carving!
Del
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."