Help on searching Router Bits
Moderators: ddw, al wolford, sbk, Bob, Kayvon
-
- Posts: 60
- Joined: Wed Apr 20, 2011 2:23 pm
Help on searching Router Bits
Im looking for Ball nose router bits if anyone can help me on find or knowing any site that can be helpful to find ball nose end mill carbide or ZrN of 1/16 diameter and cutting length more than 3/4 thank you....
ER
Re: Help on searching Router Bits
http://www.precisebits.com/products/car ... 250b4f.asp
Third item down: 0.0625 in, (1.59 mm) dia. 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Fourth item down: 0.0625 in, (1.59 mm) dia. ZrN coated 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Scott
Third item down: 0.0625 in, (1.59 mm) dia. 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Fourth item down: 0.0625 in, (1.59 mm) dia. ZrN coated 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Scott
-
- Posts: 15
- Joined: Sat Nov 19, 2011 3:46 pm
Re: Help on searching Router Bits
Hi Enrique,
I have been getting my bits from SparkTech, Inc. He has a 1/16", four flute bit. I buy 5 at a time for $22.
Email: sales@sparktechinc.com His phone number is 512-716-3131 and ask for Oliver. He has also shipped them for free.
I have been getting my bits from SparkTech, Inc. He has a 1/16", four flute bit. I buy 5 at a time for $22.
Email: sales@sparktechinc.com His phone number is 512-716-3131 and ask for Oliver. He has also shipped them for free.
Re: Help on searching Router Bits
You might check www.vortextool.com Not as well known in the home shop but they are real big in production shop cutters.
Re: Help on searching Router Bits
Great responses, some previous posts on this include:
http://www.cncsharktalk.com/viewtopic.php?f=9&t=227
http://www.cncsharktalk.com/viewtopic.php?f=2&t=337
http://www.cncsharktalk.com/viewtopic.php?f=2&t=720
A good discussion on bits to start with:
http://www.cncsharktalk.com/viewtopic.php?f=9&t=750
http://www.cncsharktalk.com/viewtopic.php?f=9&t=227
http://www.cncsharktalk.com/viewtopic.php?f=2&t=337
http://www.cncsharktalk.com/viewtopic.php?f=2&t=720
A good discussion on bits to start with:
http://www.cncsharktalk.com/viewtopic.php?f=9&t=750
-
- Posts: 60
- Joined: Wed Apr 20, 2011 2:23 pm
Re: Help on searching Router Bits
Thanks for the sites n #s and if u guys know more places, let me know thank you very much!!!
ER